Commercial Grade Tubing
Original price was: £1,000.00.£800.00Current price is: £800.00.
Commercial Grade Tubing, various materials from European Sourced Mills, please contact us for sizes and availability
Related products
-
Sale!
High Pressure Tubing
Original price was: £1,000.00.£800.00Current price is: £800.00.- Parker Autoclave’s high-pressure tubing is capable of operating to 150,000 psi (10342 bar)
- Standard tubing is available in 316 and 304 stainless steel tubing
- Coned-and-threaded connection
- Tubing sizes are 1/4″, 5/16″, 3/8″, 9/16″, and 1″.
- Operating temperatures from -423°F (-252°C ) to 1200°F (649°C).
- Stock tubing lengths from 20 to 26.5 foot (6 to 8 meters).
- Special material and special length tubing available.
-
Sale!
Condensate Pot
Original price was: £1,000.00.£800.00Current price is: £800.00.The primary use for the Parker range of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapour phase and the condensed phase in the impulse lines.
The condensate pots are available in a range of materials and have been designed in accordance with ASME VIII Div 1 and produced in an ASME coded workshop. All condensate pots are CE* marked to PED 2014/68/EU for use with Group 2 Gases. Installation can be either vertical or horizontal lines between the primary (Flow Meter) and the secondary (transmitter/ gauge) to act as a barrier to the line fluid permitting direct sensing of the flow conditions. Units should be mounted at the same level minimising possible error that could arise due to unequal head of fluid in the connecting pressure lines. Please see our Condensate Pot Installation Guide.
Typical industry applications include: Refineries, Power plants, Chemical and Petrochemical, Steel plants and other process industries.
-
Coning and Threading Machine
Parker Autoclave Engineer’s coning and threading machine used for medium and high pressure tubing end preparation. Used for on site installation, and larger size tubing. Ability to cone on one side and thread on the other this machine makes easy work of large jobs or jobs using larger size tubing which cannot be coned and threaded by hand.
- 1/2″ TEFC motor, capacitor start.
- Pop open die prevents thread damage, no reversing necessary on threading.
- Supplied with oil pump and reservoir.
- 220 volt units are CE marked.
- Optional reservoir heater for operation below 65°F.
- Stand mount with locking casters.
- Complete range of tooling available by separate order.
