Parker
Showing 37–45 of 178 results
-
Sale!
C Series
Original price was: £1,000.00.£800.00Current price is: £800.00.- Resilient, custom moulded, seat design
- Back stopped poppet to minimise spring stress
- Cracking Pressures: 1/3, 1, 5, 10, 25, 50, 75, and 100 psi (o.23, 0.69, .345, .69, 1.72, 3.45, 5.17, 6, 9 bar)
- Port connections include male and female NPT, CPI, A-LOK, UltraSeal, VacuSeal, BSP, SAE and Seal-Lok
-
Sale!
CB Series
Original price was: £1,000.00.£800.00Current price is: £800.00.- Reduces maintenance while improving performance requirements on dual fuel turbines
- Cracking Pressures: 1/3, 1, 5, 10, 25, 50, 75, and 100 psi (o.23, 0.69, .345, .69, 1.72, 3.45, 5.17, 6, 9 bar)
- Rugged ball design for demanding applications
- For high temperatures with highly viscous media
-
Sale!
CCIMS
Original price was: £1,000.00.£800.00Current price is: £800.00.- Close coupled solution for low measurement applications
- Reductions in installation time of up to 75%
- Reductions in connections and leak paths of up to 85%
- Features phastfit for rapid transmitter removal and connection
-
Sale!
ChangeOver System
Original price was: £1,000.00.£800.00Current price is: £800.00.- Compact turnkey module designed for continuous gas management
- Optional outlet regulator to control application specific outlet pressure
- Aluminium panel is standard
- Audio/ visual alarm annunciator available
- Available in 316L stainless steel and brass
- Suitable for oxygen service
-
Sale!
CO Series
Original price was: £1,000.00.£800.00Current price is: £800.00.- Suitable for applications requiring high integrity leak rates and re-sealing capabilities
- Seal integrity 4 x10-9 std. atm-cc/sec
- Back stopped poppet to minimise spring stress
- Cracking Pressures: 1/3, 1, 5, 10, 25, 50, 75, and 100 psi (o.23, 0.69, .345, .69, 1.72, 3.45, 5.17, 6, 9 bar)
- Available with highly fluorinated fluorocarbon rubber
- Only check valve with published helium leak rate
-
Sale!
Commercial Grade Tubing
Original price was: £1,000.00.£800.00Current price is: £800.00.Commercial Grade Tubing, various materials from European Sourced Mills, please contact us for sizes and availability
-
Sale!
Condensate Pot
Original price was: £1,000.00.£800.00Current price is: £800.00.The primary use for the Parker range of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapour phase and the condensed phase in the impulse lines.
The condensate pots are available in a range of materials and have been designed in accordance with ASME VIII Div 1 and produced in an ASME coded workshop. All condensate pots are CE* marked to PED 2014/68/EU for use with Group 2 Gases. Installation can be either vertical or horizontal lines between the primary (Flow Meter) and the secondary (transmitter/ gauge) to act as a barrier to the line fluid permitting direct sensing of the flow conditions. Units should be mounted at the same level minimising possible error that could arise due to unequal head of fluid in the connecting pressure lines. Please see our Condensate Pot Installation Guide.
Typical industry applications include: Refineries, Power plants, Chemical and Petrochemical, Steel plants and other process industries.
-
Coning and Threading Machine
Parker Autoclave Engineer’s coning and threading machine used for medium and high pressure tubing end preparation. Used for on site installation, and larger size tubing. Ability to cone on one side and thread on the other this machine makes easy work of large jobs or jobs using larger size tubing which cannot be coned and threaded by hand.
- 1/2″ TEFC motor, capacitor start.
- Pop open die prevents thread damage, no reversing necessary on threading.
- Supplied with oil pump and reservoir.
- 220 volt units are CE marked.
- Optional reservoir heater for operation below 65°F.
- Stand mount with locking casters.
- Complete range of tooling available by separate order.
-
Coning and Threading Tools
Parker Autoclave Engineers manufactures a manual coning and threading tool for optimum performance with tubing sizes up to 9/16” (14.3 mm) outside diameter. These precision quality manual tools permit on-site end preparation for Parker Autoclave Engineers medium and high pressure tubing installations.
Included with all kits:
Coning Tool Assembly:
• Three Collets
• Collet Nut Wrench
• Three sets of Coning Blades (1/4″ to 9/16″)
• 3/32″ Coning Blade Allen Wrench (p/n 90256)
• Four spare Set Screws (p/n 90254)
• De-burring Tool (p/n 90257)
• One quart of Cutting Oil (p/n P-8784)
• Tool Box with trayThreading Tool parts include:
• 1/8″ Die Allen Wrench (p/n P-0285)
• Die Set Screws (p/n P-0281)
• Threading Tool with Handle
• Three Guide Bushings (1/4″, 3/8″, 9/16″)
• Three Threading Dies (1/4″, 3/8″, 9/16″)
• Laminated Instruction SheetParker Autoclave Engineers both Medium and High Pressure coning and threading tool kits. Each kit consists of the required tools and other items necessary for your coning and threading needs. All kit items are placed in a hand-carry tool case with top tray.
Medium Pressure Kit (p/n KMCT-MT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 20,000 psi tubing only)402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
KMCT-MTR Kit includes Reservoir Assembly (see page 4)
KMCT-MTS Kit includes Support Arm AssemblyKMCT-MTRS Kit includes both Reservoir and Support
Arm AssembliesHigh Pressure Kit (p/n KMCT-HT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 60,000 psi tubing only)
402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
Manufacturers Information
KMCT-HTR Kit includes Reservoir Assembly (see page 5)
KMCT-HTS Kit includes Support Arm Assembly
(see page 5)
KMCT-HTRS Kit includes both Reservoir and Support
Arm Assemblies
